HRC 2 basic

The compact refrigerated and heating circulator HRC 2 basic is renowned for its high energy efficiency, a working temperature powerful infinitelyrange from -20°C to 100°C and a variable pressure and suction pump. The on-demand and speed-controlled compressor reduces noise and operating costs.
The high-quality Isolation of the 4 l bath allows fast heating and reduces heat input when cooling.
Using the external temperature control circuit is possible for up to 2.5 l thermofluid without a refill.
The integrated hopper and drain valve ensure a safe and clean handling of the thermofluid. The easy-to-open front flap allows an easy cleaning of the cooling unit’s air filter.There is a drain valve on the front side of the bath. A hose can be connected to empty the bath, so the user does not get in direct contact with the thermofluid.

• Speed-controlled refrigeration system with 400 W cooling capacity
• Speed-controlled pump make of PEEK: (0.5 bar; 22 l/min)
• 1500 W heating capacity (1200 W @115V)
• Digital level indicator
• Safety classification III (FL) according to DIN 12876
• Adjustable temperature safety circuit
•  
• Interfaces:
• RS 232
• USB

IKA Matrix Orbital Delta F1.5

The IKA Matrix Orbital Δ F1.5 is part of a new and powerful product family of thermoshakers available. IKA Matrix Orbital Δ F1.5 mixes and heats with a fixed insert for 24 x 1,5 ml tubes. Whether its blood samples, pharmaceutical agents, DNA/RNA samples or ELISA assays – samples with even the smallest volumes mix reliably and completely in all laboratory applications. No cross-contamination and an optimal mixing result.

In addition, IKA Matrix Orbital Δ F1.5 comes with numerous user-friendly features:

• Large and clear display with a convenient menu structure allows for intuitive operation
• Speeds of up to 1,500 rpm and shaker diameter of 3 mm ensure the liquid mixes quickly and effectively
• Two different speed modes for gentle heating of the samples
• Programmable ramps allow for automatic execution of mixing and heating tasks
• Smart speed adjustment according to insert, attachment and filling volume
• Aluminum die cast housing ensures secure positioning, excellent stability and everyday robustness

IKA Matrix Orbital Delta F2.0

The IKA Matrix Orbital Δ F2.0 is part of a new and powerful product family of thermoshakers available. IKA Matrix Orbital Δ F2.0 mixes and heats with a fixed insert for 24 x 2.0 ml tubes. Whether its blood samples, pharmaceutical agents, DNA/RNA samples or ELISA assays – samples with even the smallest volumes mix reliably and completely in all laboratory applications. No cross-contamination and an optimal mixing result.

In addition, IKA Matrix Orbital Δ F2.0 comes with numerous user-friendly features:

• Large and clear display with a convenient menu structure allows for intuitive operation
• Speeds of up to 1,500 rpm and shaker diameter of 3 mm ensure the liquid mixes quickly and effectively
• Two different speed modes for gentle heating of the samples
• Programmable ramps allow for automatic execution of mixing and heating tasks
• Smart speed adjustment according to insert, attachment and filling volume
• Aluminum die cast housing ensures secure positioning, excellent stability and everyday robustness

IKA Matrix Orbital Delta FP

The IKA Matrix Orbital Δ FP is part of a new and powerful product family of thermoshakers available. IKA Matrix Orbital Δ FP mixes, heats and has a universal holder for microtiter plates. Whether its blood samples, pharmaceutical agents, DNA/RNA samples or ELISA assays – samples with even the smallest volumes mix reliably and completely in all laboratory applications. No cross-contamination and an optimal mixing result.

In addition, IKA Matrix Orbital Δ FP comes with numerous user-friendly features:

• Large and clear display with a convenient menu structure allows for intuitive operation
• Stable quick lock for fast and easy change of inserts and attachments as well as automatic attachment detection
• Speeds of up to 2,000 rpm and shaker diameter of 3 mm ensure the liquid mixes quickly and effectively
• Two different speed modes for gentle heating of the samples
• Programmable ramps allow for automatic execution of mixing and heating tasks
• Smart speed adjustment according to insert, attachment and filling volume
• Aluminum die cast housing ensures secure positioning, excellent stability and everyday robustness

IKA MultiDrive basic

Regardless of whether samples are hard, soft or fibrous – the IKA MultiDrive crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available (vessels not included in delivery). With the MultiDrive basic it is possible to mix or grind. There is a USB interface available for easy actuation and documentation respectively. In combination with the milling chamber MI 250 MultiDrive basic replaces your M 20 mill.

High performance
Excellent crushing performance is guaranteed by a combination of
variable rotational speeds, ranging from 3000 rpm to 20 000 rpm,
and a 1000 Watt output.

Interval operation
The option of interval programming is simple to activate at the
press of a button. Interval operation is an asset during the coarse
crushing of hard samples or for extra thorough blending.

Integrated cooling
A cooling system is integrated in the milling cup, which allows
indirect heat dissipation. Thus, coolant and sample remain separate.

Variety of vessels (accessory)
MultiDrive provides the right vessel for each grinding task.

Vessels don't belong to the scope of delivery.

IKA MultiDrive control

Available from Q2/2020

Regardless of whether samples are hard, soft or fibrous – the IKA MultiDrive crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. MultiDrive control mixes, grinds and is also fitted with a dispersion vessel and a disposable tube. There is a USB interface available for easy actuation and documentation respectively.

High performance
Excellent crushing performance is guaranteed by a combination of
variable rotational speeds, ranging from 3000 rpm to 20 000 rpm,
and a 1000 Watt output.

Interval operation
The option of interval programming is simple to activate at the
press of a button. Interval operation is an asset during the coarse
crushing of hard samples or for extra thorough blending.

Integrated cooling
A cooling system is integrated in the milling cup, which allows
indirect heat dissipation. Thus, coolant and sample remain separate.

TFT-display
A clear TFT-display guarantees user-friendly operation.

Temperature measurement
MultiDrive control offers temperature measurement and vessel
recognition using RFID. A temperature limit can be set for
temperature-sensitive materials, or for specific planned reactions to
protect against overheating.

Weighing function
The weighing function is also integrated into the user-friendly
workflow of the IKA MultiDrive control. Weighing is performed
before crushing using the same mixing cup, so that no transfer
of contents is required.

Variety of vessels (accessory)
MultiDrive provides the right vessel for each grinding task.
Vessels don't belong to the scope of delivery.

KS 3000 i control

Innovative incubator shaker design allowing unattended operation in a temperature-controlled environment.

• Large LED display for speed and time settings
• Controls with antimicrobial coating for reduction of bacteria
• Integrated PID temperature control (use of two PT 1000 temperature sensors)
• Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60
• Electronic temperature and speed control
• Electronic timer switch: 0 - 999 h (set by the minute or by the hour)
• Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control
• Unit switches off automatically if disturbed
• Unit stops automatically when hood is lifted
• Collecting tray with drain hose on rear of unit
• Simple operation
• All functions can be controlled and documented with labworldsoft®
• Attachements are not included in delivery, please order seperatly

Shaking movement: orbital
Orbital diameter: 20 mm
Max. shaking weight (with attachment): 7,5 kg
Infinitely adjustable speed range: 10 - 500 rpm
Heat output: 1.000 W
Temperature range: RT + 5°C to 80 °C

KS 4000 i control

Innovative incubator shaker design allowing unattended operation in a temperature-controlled environment.

• Large LED display for speed and time settings
• Controls with antimicrobial coating for reduction of bacteria
• Integrated PID temperature control (use of two PT 1000 temperature sensors)
• Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60
• Electronic temperature and speed control
• Electronic timer switch: 0 - 999 h (set by the minute or by the hour)
• Optional built-in cooler for connection to an external cooling unit e.g. KV 600
• Unit switches off automatically if disturbed
• Unit stops automatically when hood is lifted
• Collecting tray with drain hose on rear of unit
• Simple operation
• All functions can be controlled and documented with labworldsoft®
• Attachements are not included in delivery, please order seperately
•  
• Shaking movement: orbital
  Orbital diameter: 20 mm
  Max. shaking weight (with attachment): 20 kg
  Infinitely adjustable speed range: 10 - 500 rpm
  Heat output: 1.000 W
  Temperature range: RT + 5°C to 80 °C
•  
•  
•  

IKA Oven 125 basic dry - glass

Universal oven for tempering, drying, aging and heating application in the laboratory.
The IKA OVEN 125 basic dry covers applications in industry, schools / universities, research, quality control and science.
Fast heat up times and a precise temperature control guarantee reproducible test results. A special odorless insulation also ensures lower operating costs.
The oven can be controlled by USB and test parameters can be recorded for further analyses.
Features:

• Temperature range: RT + 5°C to 250°C
• Capacity: 125 l
• Electronically adjustable ventilation
• Clear display and control menu
• Key lock function
• Timer
• Adjustable temperature limit
• Glass door

IKA Oven 125 control - dry

The models in the IKA Oven 125 dry series are powerful drying cabinets for temperature regulation, drying, ageing and heating tasks. Rapid heating and exact temperature regulation guarantee reproducible results in industrial laboratories, schools and universities, research, quality control or science. Thanks to its high quality insulation, the device has a very large interior of 125 l in relation to its total volume. This structure also reduces odour emissions and operating costs and ensures excellent temperature uniformity.

The Oven 125 control dry recirculating air drying cabinet heats up to 300 °C. The additional temperature selection limited TWB (DIN 12880) meets the highest security requirements. Furthermore, the temperature curve can be monitored during testing independently of the safety temperature. This means that your test material is always protected.

A well thought out interior
The generously dimensioned interior of the Oven 125 control dry is comfortably illuminated. A practical cable bushing at the rear of the device is provided as standard for measurements in the oven or in the test material. The fan switches off automatically if the door is open. Up to 6 insertable shelves can be accommodated in the interior made of stainless steel.

Interfaces
The Oven 125 control dry offers an interface for an additional sensor for direct temperature regulation in the test material. Test parameters can be stored directly on a USB stick.

Two displays
All important process parameters are displayed clearly on two large TFT displays. The temperature profiles and individual user profiles can be entered via the intuitive user interface. The real-time clock enables convenient digital documentation and a time-delayed start.

IKA Oven 125 control - dry glass

The models in the IKA Oven 125 dry series are powerful drying cabinets for temperature regulation, drying, ageing and heating tasks. Rapid heating and exact temperature regulation guarantee reproducible results in industrial laboratories, schools and universities, research, quality control or science. Thanks to its high quality insulation, the device has a very large interior of 125 l in relation to its total volume. This structure also reduces odour emissions and operating costs and ensures excellent temperature uniformity.

The Oven 125 control dry recirculating air drying cabinet heats up to 300 °C. The additional temperature selection limited TWB (DIN 12880) meets the highest security requirements. Furthermore, the temperature curve can be monitored during testing independently of the safety temperature. This means that your test material is always protected.

The glass door allows for better monitoring of your samples.

A well thought out interior
The generously dimensioned interior of the Oven 125 control dry is comfortably illuminated. A practical cable bushing at the rear of the device is provided as standard for measurements in the oven or in the test material. The fan switches off automatically if the door is open. Up to 6 insertable shelves can be accommodated in the interior made of stainless steel.

Interfaces
The Oven 125 control dry offers an interface for an additional sensor for direct temperature regulation in the test material. Test parameters can be stored directly on a USB stick.

Two displays
All important process parameters are displayed clearly on two large TFT displays. The temperature profiles and individual user profiles can be entered via the intuitive user interface. The real-time clock enables convenient digital documentation and a time-delayed start.

RC 2 basic

High-efficiency circulating chiller with powerful 400 W cooling capacity. Designed for cooling applications up to -20 °C.
The speed-controlled PEEK pump allows an indirect continuous adjustment of the maximum pressure and flow rate. Due to its excellent temperature stability of about ± 0.1 K (@ -10 °C), the RC 2 can handle even sophisticated applications.
The included feed hopper and bleed valve enable the safe and clean handling of the thermofluid. An easy to open front hood allows for convenient cleaning of the air filter.
The high quality insulated 4-liter bath reservoir allows the use of up to 2.5 liters of thermofluid in the external cooling circle without refilling.

• Temperature range: -20 °C - RT
• Temperature stability: 0,1 K
• Large easy to read LED display for pump speed and temperature- Large easy to read TFT display for temperature, pump speed, liquid level and safety temperature
• Visible fluid level display
• Drain valve and optimized bath base for safe and thorough emptying
• Easy accessible air filter
• Visual and acoustic safety warnings
•  

RC 5 basic

Powerful recirculating chiller, designed for external cooling applications up to -30°C.
The energy-efficient chiller is operated with an eco-friendly refrigerant and reaches a high power density. This results in a comparatively small working space in the lab.
The speed-controlled PEEK pump allows an indirect, continuous adjustment of the maximum pressure and flow rate. Due to its excellent temperature stability of about ± 0,1 K, the RC 5 can handle even sophisticated applications. The isolated, high-quality 7l bath has an integrated hopper and drain valve, ensuring a safe and clean handling of the thermofluid. A hose can be connected to empty the bath in order to avoid direct contact with the thermofluid. The easy-to-open front flap allows an easy cleaning of the cooling unit’s air filter.

Key Features

• Speed-controlled refrigeration system with 1400 W cooling capacity (@20°C)
• Natural thermofluid R290
• Designed for cooling applications up to -30°C - RT
• Extended operating temperature range until 80°C
• Excellent temperature stability of about ± 0,1K (@-10°C)
• Speed-controlled pump made of PEEK: (0,6 bar; 31l/min)
• Digital level indicator

ROTAVISC hi-vi I Complete

The new ROTAVISC series determines the viscosity of liquids in all areas of application ranging from the laboratory to quality control. The four devices measure in different viscosity ranges. Regardless of a simple or demanding viscosity measurement - the ROTAVISC delivers rapid and accurate results. The scope of delivery includes a standard spindle set ( SP7-SP12), a protective bracket, temperature sensor, quick connector, hook connector and ROTASTAND stand.

Easy to operate
The generous 4.3″ TFT display allows for an intuitive menu guidance. A digital spirit level also supports the correct set-up of the start-up condition. The simple ramp function simplifies repetitive tasks.

Highest measurement accuracy
The level of measurement accuracy of the ROTAVISC rotational viscometer for both Newtonian and non-Newtonian fluids is +/- 1 % of the measuring range. The reproducibility is +/- 0.2 %.

Stepless speed
ROTAVISC is a viscometer, which offers stepless speed adjustment.

IKA Rotavisc hi-vi I Complete
Viscosity measuring range: 200 - 80.000.000 mPas

ROTAVISC me-vi Complete

The new ROTAVISC series determines the viscosity of liquids in all areas of application ranging from the laboratory to quality control. The four devices measure in different viscosity ranges. Regardless of a simple or demanding viscosity measurement - the ROTAVISC delivers rapid and accurate results. The scope of delivery includes a standard spindle set ( SP7- SP12), a protective bracket, temperature sensor, quick connector, hook connector and ROTASTAND stand.

Easy to operate
The generous 4.3″ TFT display allows for an intuitive menu guidance. A digital spirit level also supports the correct set-up of the start-up condition. The simple ramp function simplifies repetitive tasks.

Highest measurement accuracy
The level of measurement accuracy of the ROTAVISC rotational viscometer for both Newtonian and non-Newtonian fluids is +/- 1 % of the measuring range. The reproducibility is +/- 0.2 %.

Stepless speed
ROTAVISC is a viscometer, which offers stepless speed adjustment.

IKA Rotavisc me-vi Complete
Viscosity measuring range: 100 - 40.000.000 mPas

RV 10 digital V

The RV 10 digital represents the continual enhancement of the IKA RV 10 Rotary Evaporator line. The unit comes with a new universal heating bath, vertical glassware, state-of-the-art safety features and digital connectivity. The RV 10 digital is a robust and reliable lab companion. Its optimized bath volume allows for fast heat-up times. The condenser unit has special designed glass tubes that utilize the 1500 cm² surface extremely efficient. That’s why the RV 10 digital delivers reliable and reproducible process results that are usually reserved for more costly systems. Additional features such as smooth start, left-right interval or timer function capability support the user in their daily lab work. Another important aspect of the RV 10 digital are the sophisticated safety features. The motorized lift has an automated lift-out function in case of power outage to prevent superheating of the solvent. Safety temperature circuits can be set individually. Dry-run protection, adjustable lower end stop and lock function of bath setting complete the line of safety features. Furthermore, IKA offers a choice of coated glassware for increased safety needs. The RS 232 interface allows for remote control via IKAs “labworldsoft”. The Heating bath is controlled via the IR interface from the main unit.

• New: 4 l heating bath
• Universal water/oil heating bath
• Vertical Glassware
• Motorized lift with “safety-stop” function
• RS 232 and IR Interface
• Optimized heating bath volume for fast heat-up
• Highly efficient 1500 cm² condenser unit
• Rugged design
• Ergonomically placed handles on Heating bath
• Smooth start
• Left-right interval
• Timer function
• Dry-run protection
• Safety temperature circuits
• Lower-end stop
• Choice of coated glassware
• Push-off mechanism to loosen tight fitted glassware
• Easy and safe operation due to ergonomical design of the user interface

RV 8 V

The RV 8 Rotary Evaporator is the manual basic model in the family of IKA Rotation Evaporators. It finds a multitude of uses in the chemical, pharmaceutical, and biotechnology industries, in research and development, in manufacturing and quality assurance, in laboratories, and in plant construction. Thanks to specially designed glass guides, the vertical condenser makes extremely efficient use of the 1500 cm² cooling surface. Digital displays for speed and heating bath temperature enable optimum control of all distillation processes.

• New: 4 l heating bath
• integrated safety lift-out function in case of power failure
• package includes Woulff bottle
• water/oil heating bath with carrying handles
• locking button for fixing heating bath temperature
• clearly legible, glass-covered, black-and-white display panel
• locking mechanism: red indicator shows unlocked position of the vapor tube
• manual lift for precise positioning of the glassware
• adjustable immersion angle
• single-handed manual lift handling, suitable for left and right-handed operators
• speed range: 5 - 300 min-1
• low device voltage (24V) ensures user safety
• flask clamping mechanism with integrated push-off function for easy exchange of evaporation flasks
• high-efficiency condenser with 1500 cm² cooling surface - low space requirements
• compatible with the entire range of IKA RV 10 glassware